Skip to content

Kingdom Metal Works

Consultation Services Designed for Resto/ Fab Shops ~ Private One on One Metal Shaping Training Classes

  • Home
  • About
  • Photos
  • Blog
  • One on One Private Metal Shaping Classes
  • Contact
  • Testimonials

Photos

IMG_0299
IMG_0293
IMG_0286
IMG_0285
IMG_0235
IMG_0211
IMG_0202
IMG_0200
IMG_0197
IMG_0191
IMG_0190
IMG_0186
IMG_0183
IMG_0182
IMG_0180
IMG_0137
IMG_0126
IMG_0124
IMG_0121
IMG_0120
IMG_0108
IMG_0106
IMG_0103
IMG_0081
IMG_0077
IMG_0056
IMG_0052
IMG_0049
IMG_0046
IMGP6838
IMGP6837
IMGP6830
IMGP6812
IMGP6804
IMGP6803
IMGP6797
IMGP6790
IMGP6789
IMGP6781
IMGP6779
IMGP6778
IMGP6772
IMGP6726
IMGP6722
IMGP6720
IMGP6711
IMGP3551
IMGP3547
IMGP3523
IMGP3520
IMGP3519
IMGP3517
IMGP3502
IMGP3501
IMGP3476
IMGP3459
IMGP3457
IMGP3452
IMGP3451
IMGP3450
IMGP3444
IMGP3442
IMGP3441
IMGP3438
IMGP3434
IMGP3419
IMGP3407
IMGP3393
IMGP3392
IMGP3391
IMGP3390
IMGP3389
IMGP3388
IMGP3387
IMGP3386
IMGP3384
IMGP3383
IMGP3380
IMGP3357
IMGP3346
IMGP3343
IMGP3341
IMGP3339
IMGP3338
IMGP3334
IMGP3329
IMGP3328
IMGP3325
IMGP3320
IMGP3317
IMGP3314
IMGP3309
IMGP3303
IMGP3293
IMGP3288
IMGP3287
IMGP3286
IMGP3281
IMGP3280
IMGP3276
IMGP3275
IMGP3273
IMGP3270
IMGP3269
IMGP3253
IMGP3246
IMGP3244
IMGP3241
IMGP3225
IMGP3220
IMGP3219
IMGP3214
IMGP3212
IMGP3211
IMGP3207
IMGP3196
IMGP3192
IMGP3184
IMGP3179
IMGP3164
IMGP3161
IMGP3158
IMGP3155
IMGP3145
IMGP3144
IMGP3141
IMGP3140
IMGP3133
IMGP3130
IMGP3125
IMGP3121
IMGP3120
IMGP3117
IMGP3113
IMGP3108
IMGP3104
IMGP3098
IMGP3097
IMGP3088
IMGP3084
IMGP3060
IMGP3059
IMGP3056
IMGP3055
IMGP3047
IMGP3046
IMGP3044
IMGP3032
IMGP3015
IMGP3013
IMGP3012
IMGP3011
IMGP3010
IMGP3007
IMGP2998
IMGP2995
IMGP2991
IMGP2989
IMGP2988
IMGP2956
IMGP2947
IMGP2943
IMGP2938
IMGP2934
IMGP2927
IMGP2894
IMGP2891
IMGP2883
IMGP2880
IMGP2850
IMGP2794
IMGP2777
IMGP2776
IMGP2774
IMGP2772
IMGP2771
IMGP2732
IMGP2726
IMGP2718
IMGP2713
IMGP2696
IMGP2692
IMGP2688
IMGP2640
IMGP2624

History of work done by Kevin Masson:

IMG_0879
IMG_0878
IMG_0877
IMG_0876
IMG_0875
IMG_0874
IMG_0873
IMG_0872
IMG_0871
IMG_0870
IMG_0868
IMG_0867
IMG_0865
IMG_0863
IMG_0862
IMG_0859
IMG_0858
IMG_0857
IMG_0856
IMG_0855
IMG_0854
IMG_0850
IMG_0849
IMG_0848
IMG_0835
IMG_0836
IMG_0837
IMG_0838
IMG_0839
IMG_0840
IMG_0841
IMG_0842
IMG_0844
IMG_0845
IMG_0846
IMG_0847
IMG_0834
IMG_0833
IMG_0830
IMG_0829
IMG_0828
IMG_0827
IMG_0826
IMG_0825
IMG_0824
IMG_0823
IMG_0822
IMG_0846
IMG_0796
IMG_0797
IMG_0798
IMG_0799
IMG_0800
IMG_0801
IMG_0802
IMG_0803
IMG_0804
IMG_0805
IMG_0808
IMG_0811
IMG_0812
IMG_0813
IMG_0814
IMG_0815
IMG_0816
IMG_0817
IMG_0818
IMG_0819
IMG_0821

Share this:

  • Twitter
  • Facebook

Like this:

Like Loading...

Hours & Info

919 Campground Rd. Hampton, Ky 42047
1-310-947-1120
Mon - Thurs. 9:00 am-5:00 pm
Contact us at: kingdommetalworks@gmail.com

kingdommetalworks

One on One Private Metal Shaping/Welding Training Classes at my shop~ Offsite Training at Fab/Resto Shops all Over USA and Abroad

Kevin Masson Owner/Instructor
Erik and I detail shaping the Nomad door skin givi Erik and I detail shaping the Nomad door skin giving Erik experience on the power hammer at Jimmy Shines shop in Orange Ca. #baileigh #baileigharmy #hotrodsandhobbiesinc #jimmyshinespeedshop #powerhammer
Erik and I wheeling up the Nomad door skin on the Erik and I wheeling up the Nomad door skin on the English wheel. Keeping the panel steady to get the correct radius needed. #englishwheel #englishwheeling #sharingknowledge #metalshapingtools #metalshaping #hotrodshop #nomad
This week I am training the dedicated crew @hotrod This week I am training the dedicated crew @hotrodsandhobbiesinc in Signal Hill Calif, we are working on door skins😎...stay tuned for updates! #investinyourbusiness #sharingknowledge #metalshapingtools #metalshaping #customfabrication #hotrodshop #buildyourskills
Mason working on his seam. Mason working on his seam.
Leading on the joint, getting it ready for the fil Leading on the joint, getting it ready for the file.
Jay is giving a demonstration on using tinning but Jay is giving a demonstration on using tinning butter on the seam.
Devon is spot welding his test pattern with the Pr Devon is spot welding his test pattern with the Pro Spot. Once he spot welds, we will prepare to lead the seam with lead free leading.
The last day of training @v8speedandresto Mason i The last day of training @v8speedandresto Mason is setting up the Pro Spot welder. Thought you might like to see it before we begin the lesson. #spotwelding #spotweldinggun #spotweldingmachine #metalshaping #customfabrication #metalshapingtools #investinyourbusiness #kingdommetalworks #sharingknowledge
Creating a tunnel section for a Ranchero @v8speeda Creating a tunnel section for a Ranchero @v8speedandresto. Devon is on the shrinker / stretcher during the training portion of my week long visit to this amazing shop. Thank you Kevin and Kelle for having me in again. #panelbeater #sharingknowledge #metalshapingshop #kingdommetalworks #hotrodshop #buildyourskills #movingmetal #shrinkerstretcher #customfabrication #metalshapingtools #metalshaping #coachbuilt #investinyourbusiness #restoration
This week I am training @v8speedandresto shop in R This week I am training @v8speedandresto shop in Red Bud IL. We are working on the shop projects while building the skills of this dedicated crew. #kingdommetalworks #metalshapingclass #metalshapingtools #metalshapingshop #privatemetalshapingclasses #customfabrication #buildyourskills #sharingknowledge #panelbeater #movingmetal #hotrodshop #shrinkerstretcher
Here at Kingdom Metal Works, I offer private one-o Here at Kingdom Metal Works, I offer private one-on-one metal shaping classes. Each class is tailored to the student, no two classes are alike. My classes are complete hands on, no interruptions and are for the beginner to the very advanced. Also, if you are a shop owner and are looking to train your crew, I offer training at your shop, using your machinery and your projects to move those projects forward at the same time. For class availability and prices, email me at kingdommetalworks@gmail.com or visit my website at kingdommetalworks.com #privatemetalshapingclasses #metalshaping101 #metalshapingshop #metalshapingtools #metalshapingclass
Jake's last project for his private one-on-one met Jake's last project for his private one-on-one metals shaping class was to fabricate half of a 1938 Chevy headlamp bucket. He is using a steel face dead-blow hammer and bar slapper to dress a small reverse curve for the mounting plate.#metalshaping101 #metalshapingtools #metalshapingclass #metalshapingclasses #1938chevy
Jake's last project for his private one-on-one met Jake's last project for his private one-on-one metals shaping class was to fabricate half of a 1938 Chevy headlamp bucket. He is using a steel face dead-blow hammer and bar slapper to dress a small reverse curve for the mounting plate.#metalshaping101 #metalshapingtools #metalshapingclass #metalshapingclasses #1938chevy
Adding a wired edge to the panel project. #wireded Adding a wired edge to the panel project. #wirededge #sharingknowledge #coachbuilt #metalshaping #customfabrication #buildyourskills
Tipping the edge in the bead roll.#beadroll #beadr Tipping the edge in the bead roll.#beadroll #beadroller #beadrolled #beadrolling #sharingknowledge #coachbuilt #metalshaping #customfabrication #englishwheel #buildyourskills #panelbeater #restoration #investinyourbusiness
Today Jake's project is to take a flat piece of me Today Jake's project is to take a flat piece of metal and form it to a section of a wooden buck. He will first shape it using a leather shot bag and mallet, then run the panel through the English wheel, tip an edge through the bead roll, and finally put a wired edge in for good practice.
Finishing up the hood scoop project for Jake's pri Finishing up the hood scoop project for Jake's private metal shaping class. We are using the #jameyjordan Bead Roller from Mittler Bros for this portion of the project. The longer version of this project can be found on my Kingdom Metal Works YouTube Channel...check it out! #jameyjordan #beadroll #hoodscoop #investinyourbusiness #customfabrication #restoration #panelbeater #coachbuilt #buildyourskills #metalshaping #sharingknowledge #englishwheel #mittlerbro
Jake from Reisinger Custom Rebuilding in Evansvill Jake from Reisinger Custom Rebuilding in Evansville IN is here for his private metal shaping class. The owner, Pat Reisinger scheduled a 5 day class for Jake here at Kingdom Metal Works to build Jake's skills on the English wheel. As Pat told me, "The strongest team member sets the quality bar for all involved". This is wisdom on the part of the shop owner, he knows that to invest in his crew is a lasting investment in his overall business. Today Jake is wheeling to the profile he made for the fabrication of a hood scoop. Jake will wheel the center section and then add shape to the sides of the scoop once the layout marks are done.#coachwork #movingmetal #buildyourskills #nosecretshere #sharingknowledge #makingnoise #coachbuilt #restoration #metalshaping #investinyourbusiness #panelbeater #customfabrication #hoodscoop
Today I am demonstrating again how to blend and sm Today I am demonstrating again how to blend and smooth using a dollie and hammer to shape portions of the aluminum panel to be fitted to the body. Hand tools are a necessity for the metal shaper and needed to get to those difficult areas. In my metal shaping/welding training class, you will get one on one instruction of the use of the English wheel, power hammer, planishing hammer, bead roller and all of the various dollies, hammers and slappers. #privatemetalshapingclass #oneononeinstruction #completehandsontraining #buildyourskills #moveyourprojectforward #movingmetal #makingnoise #coachwork #sharingknowledge #nosecretshere
Training Cynthia on wheeling a large panel at Coll Training Cynthia on wheeling a large panel at Collin County Customs. Nothing brings unity and cohesiveness in the workplace than a shop owner investing in their crew. My job is to come in, use your machinery, your projects and work with each crew member independently and as a group to see how I can best build their skills and move your shop projects forward. I have availability starting May 2022. Email me at kingdommetalworks@gmail.com for pricing.
Load More... Follow on Instagram

Our Location

919 Campground Rd.
Hampton, KY 42047
310-947-1120
Monday - Thursday : 9am -5pm

Kingdom Metal Works

Kingdom Metal Works

Kevin Masson Owner of Kingdom Metal WorksFollow

Metal Shaping Instructor/Fabricator

Kevin Masson Owner of Kingdom Metal Works
Kingdommetal1Kevin Masson Owner of Kingdom Metal Works@Kingdommetal1·
21 Mar

The Strongest Team Member Sets the Quality Bar for All Involved https://kingdommetalworks.com/2022/03/21/the-strongest-team-member-sets-the-quality-bar-for-all-involved/

Reply on Twitter 1506005054733443083Retweet on Twitter 1506005054733443083Like on Twitter 1506005054733443083Twitter 1506005054733443083
Kingdommetal1Kevin Masson Owner of Kingdom Metal Works@Kingdommetal1·
27 Dec

My one on one private metal shaping classes are designed from the beginner to the more advanced student. Each class is tailored to the student because no student is alike in their learning styles.
https://fb.watch/a8LBNb4yIt/ via @FacebookWatch

Reply on Twitter 1475258915076071428Retweet on Twitter 1475258915076071428Like on Twitter 1475258915076071428Twitter 1475258915076071428
Kingdommetal1Kevin Masson Owner of Kingdom Metal Works@Kingdommetal1·
24 Dec

Private One on One Metals Shaping Classes https://kingdommetalworks.com/2021/12/24/private-one-on-one-metals-shaping-classes/

Reply on Twitter 1474401329976156189Retweet on Twitter 1474401329976156189Like on Twitter 1474401329976156189Twitter 1474401329976156189
Kingdommetal1Kevin Masson Owner of Kingdom Metal Works@Kingdommetal1·
10 Nov

English Wheeling a Curved Panel to a Wooden Buck~ Private Metal Shaping Class With Jeff Cambre http://kingdommetalworks.com/2021/11/10/english-wheeling-a-curved-panel-to-a-wooden-buck-private-metal-shaping-class-with-jeff-cambre/

Reply on Twitter 1458283398603149314Retweet on Twitter 1458283398603149314Like on Twitter 1458283398603149314Twitter 1458283398603149314
Kingdommetal1Kevin Masson Owner of Kingdom Metal Works@Kingdommetal1·
14 Aug

Ongoing training/working at Ironworks Speed & Kustom in Bakersfield CA. http://kingdommetalworks.com/2021/08/14/training-assisting-at-ironworks-speed-and-kustom/

Reply on Twitter 1426332903672328194Retweet on Twitter 1426332903672328194Like on Twitter 1426332903672328194Twitter 1426332903672328194
Load More...
Powered by WordPress.com.
 

Loading Comments...
 

    %d bloggers like this: